Together, on the right track!

SPECIALIST IN RAIL TRACK

AND RAIL HANDLING

MADE IN FRANCE

+33 1 39 37 45 45

ADJUSTABLE CLIPS

rails

fastening accessories

Track accessories

Series 1000

Series 2000

Series 2100

Series 5100

SINGLE WELDED CLIP, SERIES 1000 - 5000

Welded clips, supplied with bolts

CLIP VALEX 1004

SERIES 1000

 

TECHNICAL SPECIFICATIONS:

• Lateral adjustment 7 mm

• Lateral load of 60 KN

• Tightening torque 175 Nm

 

Use:

The Valex series 1000 direct fastening system is intended for rails of the overhead crane type. It is very robust, reliable and occupies little space. It can be used for the tracks of any type of crane.

 

CHARACTERISTICS:

• Elastic fastening of the rails, with or without pad.

• System consisting of two elements, permitting simple lateral adjustment of the rail.

• Easy maintenance; the elastomeric nose fixed on the point where the clip presses on the rail increases the rail-support tolerances, reduces the forces on the fastenings and guarantees better retention of the rail.

 

ASSEMBLY INSTRUCTIONS:

Align the rails. Position the clips on the rail, then the washers. Insert the bolt and proceed to tighten. Check the alignment of the rails and the exact contact of the clips on the rails. Complete tightening.

 

ADDITIONAL DATA SHEETS ON REQUEST

SINGLE BOLTED CLIP, SERIES 2000 - 6000 - 7000

 

Bolted clips, supplied without bolts

CLIP VALEX 2020

SERIES 2000

 

TECHNICAL SPECIFICATIONS

• Lateral adjustment 5 to 15 mm

• Lateral load of 125 kN

• Tightening torque 550 Nm

 

Use

The Valex series 2000 direct fastening system is intended for rails of the overhead crane type. It is very robust, reliable and occupies little space. It can be used for the tracks of any type of crane.

 

CHARACTERISTICS

• Elastic fastening of the rails, with or without pad.

• System consisting of two elements, permitting simple lateral adjustment of the rail.

• Easy maintenance; the elastomeric nose fixed on the point where the clip presses on the rail increases the rail-support tolerances, reduces the forces on the fastenings and guarantees better retention of the rail.

 

ASSEMBLY INSTRUCTIONS

Align the rails. Position the clips on the rail, then the washers. Insert the bolt and proceed to tighten. Check the alignment of the rails and the exact contact of the clips on the rails. Complete tightening.

 

ADDITIONAL DATA SHEETS ON REQUEST

DOUBLE BOLTED CLIP, SERIES 2100 - 3100

 

Bolted clips, supplied without bolts

CLIP VALEX 2124

SERIES 2100

 

TECHNICAL SPECIFICATIONS

• Lateral adjustment 15 mm

• Lateral load of 250 kN

• Tightening torque 500 Nm

 

Use

The Valex series 2100 direct fastening system is intended for rails of the overhead crane type. It is very robust, reliable and occupies little space. It can be used for the tracks of any type of crane.

 

CHARACTERISTICS

• Elastic fastening of the rails, with or without pad.

• System consisting of two elements, permitting simple lateral adjustment of the rail.

• Easy maintenance; the elastomeric nose fixed on the point where the clip presses on the rail increases the rail-support tolerances, reduces the forces on the fastenings and guarantees better retention of the rail.

 

ASSEMBLY INSTRUCTIONS

Align the rails. Position the clips on the rail, then the washers. Insert the bolt and proceed to tighten. Check the alignment of the rails and the exact contact of the clips on the rails. Complete tightening.

 

ADDITIONAL DATA SHEETS ON REQUEST

DOUBLE WELDED CLIP SERIES 5100

 

Welded clips, supplied with bolts

CLIP VALEX 5120

SERIES 5100

 

TECHNICAL SPECIFICATIONS

• Lateral adjustment 10 to 20 mm

• Lateral load of 270 kN

• Tightening torque 500 Nm

 

Use

The Valex series 5100 direct fastening system is intended for rails of the overhead crane type. It is very robust, reliable and occupies little space. It can be used for the tracks of any type of crane.

 

CHARACTERISTICS

• Elastic fastening of the rails, with or without pad.

• System consisting of two elements, permitting simple lateral adjustment of the rail.

• Easy maintenance; the elastomeric nose fixed on the point where the clip presses on the rail increases the rail-support tolerances, reduces the forces on the fastenings and guarantees better retention of the rail.

 

ASSEMBLY INSTRUCTIONS

Align the rails. Position the clips on the rail, then the washers. Insert the bolt and proceed to tighten. Check the alignment of the rails and the exact contact of the clips on the rails. Complete tightening.

 

ADDITIONAL DATA SHEETS ON REQUEST

WORKSHOPS AND COMMERCIAL SERVICES

24 rue du 8 mai 1945
95340 Persan - FRANCE

Tél. : + 33 1 39 37 45 45

Fax : + 33 1 39 37 45 44

REGISTERED ADDRESS

23 rue de la Boétie

75008 Paris - FRANCE

Legal notices I Site map I General conditions of sale I © PATRY 2016 I Agence RDVA - www.rdva.fr